Software Companions Support Forum
Sign up Calendar Latest Topics
 
 
 


Reply
  Author   Comment  
mdmpe

Registered:
Posts: 2
Reply with quote  #1 
When exporting a layer that has filled polygons the number of fill lines becomes problematic in destination mechanical CAD systems.  Is there a way to change filled polygons so the fill lines are suppressed?
softcomp

Administrator
Registered:
Posts: 242
Reply with quote  #2 

Hi,
Could you please send us a sample file?

Best regards,
Support

mdmpe

Registered:
Posts: 2
Reply with quote  #3 
Files attached:
 
Art01_top.zip  original .pho file loaded into Gerbview
Gerbview_capture.jpg  screencap of as-viewed.  Polygon areas are filled.
000-00071-0_C2_art01_top.zip (DXF) as-exported from Gerbview
Capture.jpg  vector-only DXF in ME CAD system
 
My interest in this is as follows:
When a board design is completed I import the top and bottom layers into vector CAD (my 3D system) via DXF.  That helps me confirm hole locations, edge details, component locations, and most particularly - edges of large ground or shield areas that interface to my metal housings. 
 
When I import via the above process, the large number of 'filler' lines in the polygon area make the DXF much larger and very awkward to select only the perimeter lines.
 
In a similar manner I do not export the circles that are on the end of traces because they get distracting from the rest of the circles needed and make the file larger.  A similar 'switch' to 'not fill' polygon areas would be fantastic.
 

Attached Images
jpeg Gerbview_capture.jpg (183.12 KB, 4 views)
jpeg capture.JPG (109.36 KB, 4 views)

 
Attached Files
zip 000-00071-0_C2_art01_top.zip (74.63 KB, 2 views)
zip art01_top.zip (34.83 KB, 2 views)

Previous Topic | Next Topic
Print
Reply

Quick Navigation:

Easily create a Forum Website with Website Toolbox.